View TM35KBH07-V1_7862772.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

shanghai tianma micro-electronics tm035kbh07 v0.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 1 of 26 coversheet model no. : tm35kbh07 issued date: 2011-04-11 version : ver 1.0 preliminary product specification final product specification customer : approved by notes shanghai tianma confirmed : prepared by checked by approved by this technical specification is subjected to change without notice
shanghai tianma micro-electronics tm035kbh07 v0.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 2 of 26 table of contents coversheet .......................................................................................................................................1 table of contents..............................................................................................................................2 record of revision ...........................................................................................................................3 1 general specifications....................................................................................................................4 2 touch panel general specifications........................................................................................... ....5 3 input/output terminals...................................................................................................................6 4 absolute maximum ratings..................................................................................................... .......7 5 electrical characteristics................................................................................................... .............8 6 module timing chart........... ...........................................................................................................9 7 tp timing chart. .......... .................................................................................................................18 8 optical characteristics..................................................................................................................19 9 environmental / reliability tests...................................................................................................23 10 mechanical drawing ...................................................................................................................24 11 packing drawing.........................................................................................................................25 12 precautions for use of lcd modules ......................................................................................... 26
shanghai tianma micro-electronics tm035kbh07 v0.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 3 of 26 record of revision rev issued date description editor 0.0 2009-11-20 provisional draft release for reference youkui shang 0.1 2010-04-19 add optical spec. wanjun li 1.0 2011-4-11 add page 18:tp timing chart lu bai
shanghai tianma micro-electronics tm035kbh07 v0.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 4 of 26 1 general specifications feature spec size 3.5inch resolution 320(rgb) x 240 interface rgb/ccir656/601 color depth 16.7m dithering technology type a-si tft dot pitch (mm) 0.073 x 0.219 pixel configuration r.g.b. vertical stripe display mode tm with normally white surface treatment(up polarizer) clear type viewing direction 12 o?clock display spec. gray scale inversion direction 6 o?clock dim. lcm (w x h x d) (mm) 76.90 x 63.90 x 4.00 with /without tsp with tsp mechanical characteristics led numbers 6 leds serial electronic driver ic nt39016d note 1: viewing direction for best image quality is different from tft definition; there is a 180 degree shift. note 2 : requirements on environmental protection: q/s0002 note 3 : lcm weight tolerance : +/- 5%
shanghai tianma micro-electronics tm035kbh07 v0.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 5 of 26 2 touch panel specifications feature spec tp size 3.5inch type projective capacitive multi-touch view area 71.08mm x 53.56mm active area 71.08mm x 53.56mm interface iic,uart surface hardness >5h general specifications hitting life R100 000 000 times transparency >85% optical characteristics haze 5% operation -20 +70 environmental characteristics storage -30 +80 working voltage 2.7v 5v electrical characteristics resolution 320*240 tp driver ic cy8ctmg110
shanghai tianma micro-electronics tm035kbh07 v0.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 6 of 26 3 input/output terminals 3 .1 tft lcd panel recommend connector: kyocera elco: 6240 serials no symbol i/o description remark 1,2 led_cathode i led_cathode 3,4 led_anode i led_anode 5 nc - no connect 6 reset i reset 7 nc - no connect 8 nc i no connect 9 nc i no connect 10 nc i no connect 11 nc i no connect 12 d00 i data 00 note 3-1 13 d01 i data 01 note 3-1 14 d02 i data 02 note 3-1 15 d03 i data 03 note 3-1 16 d04 i data 04 note 3-1 17 d05 i data 05 note 3-1 18 d06 i data 06 note 3-1 19 d07 i data 07 note 3-1 20 d08 i data 08 note 3-1 21 d09 i data 09 note 3-1 22 d10 i data 10 note 3-1 23 d11 i data 11 note 3-1 24 d12 i data 12 note 3-1 25 d13 i data 13 note 3-1 26 d14 i data 14 note 3-1 27 d15 i data 15 note 3-1 28 d16 i data 16 note 3-1 29 d17 i data 17 note 3-1 30 d18 i data 18 note 3-1 31 d19 i data 19 note 3-1 32 d20 i data 20 note 3-1 33 d21 i data 21 note 3-1 34 d22 i data 22 note 3-1 35 d23 i data 23 note 3-1 36 hsync i horizontal synchronous signal 37 vsync i vertical synchronous signal 38 clk i data clock 39 nc - no connect 40 nc - no connect 41 vdd p power supply 42 vdd p power supply 43 spena i serial port data enable signal 44 nc - no connect 45 nc - no connect
shanghai tianma micro-electronics tm035kbh07 v0.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 7 of 26 46 nc - no connect 47 nc - no connect 48 nc - no connect 49 spck i spi serial clock 50 spda i/o spi serial data input/output 51 nc - no connect 52 den i data enabling signal 53 gnd p ground 54 gnd p ground i: input o: output p: power note 3-1: mode d(23:16) d(15:8) d(7:0) hsync vsync den ccir 656 d(23:16) gnd gnd nc nc nc ccir 601 d(23:16) gnd gnd hsync vsync nc nc for hv mode 8 bit rgb d(23:16) gnd gnd hsync vsync den for den mode nc for hv mode 24 bit rgb r(7:0) g(7:0) b(7:0) hsync vsync den for den mode 3.2 touch panel pin description no symbol description 1 vcc vcc 2 gnd gnd 3 int interrupt 4 scl iic clock 5 sda iic data 6 tx uart transmission 4. absolute maximum ratings gnd=0v,ta = 25 o c item symbol min max unit remark power supply voltage vddio,vci -0.3 5.0 v logic input signal voltage r0~r5,b0~b5,g0~g5,resb, sdi,csb,sck,hsync vsync,dotclk,den -0.3 vddio+0.3 v back light forward current i led -- 25 ma for each led operating temperature t opr -20 70 storage temperature t stg -30 80
shanghai tianma micro-electronics tm035kbh07 v0.1 5 electrical characteristics 5.1) driving tft lcd panel gnd=0v, ta=25 item symbol min typ max unit remark logic i/o power supply vddio 3.0 3.3 3.6 v analog power supply vci 3.0 3.3 3.6 v low level v il 0 -- 0.2xvddio v input signal voltage high level v ih 0.8xvddio -- vddio v d00~d23,reset ,den spena,spck,spda hsync,vsync ,clk black mode (60hz) -- 35 50 mw (panel+ lsi) power consumption standby mode -- 0.1 0.15 mw 5.2) driving backlight ta=25 item symbol min typ max unit remark forward current i f -- 20 25 ma forward voltage v f 16.8 19.2 21.6 v for each led power consumption w bl -- 384 -- mw note1,2,3 operating life time -- 10000 (20000) note 1: the figure below shows the connection of backlight led. note 2: one led : i f =20 ma, v f =3.2v note 3: if is defined for one channel led. optical performance should be evaluated at ta=25 only. if led is driven by high current, high ambient temperature & humidity condition, the life time of led will be reduced. operating life means brightness goes down to 50% initial brightness. typical operating life time is estimated data. the information cont ed herein is the exclusive property of shanghai tianma micro-electronics corporation, and ot be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 8 of 26 ain shall n
shanghai tianma micro-electronics tm035kbh07 v0.1 5.3) block diagram 6. module timing chart 6.1) timing parameter (vcc=3.3v gnd =0v,ta=25 ) parameter symbol min typ max unit condition clk clock time t clk 33.3 -- -- ns clk pulse duty t chw 40 50 60 % t clk hsync to clk t hc -- -- 1 clk -- hsync width t hwh 1 -- -- clk -- vsync width t vwh 1 -- -- ns -- hsync period time t h 60 63.56 67 ns -- vsync set-up time t vst 8 -- -- ns -- vsync hold time t vhd 10 -- -- ns -- hsync setup time t hst 8 -- -- ns -- hsync hold time t hhd 10 -- -- ns -- data set-up time t dsu 8 -- -- ns d00~d23 to clk data hold time t dhd 10 -- -- ns d00~d23 to clk den set up time t esu 12 -- -- ns den to clk note: each clk frequency of 24 bit rgb mode,8 bit rgb mode,ccir601and ccir656 are different. the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 9 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 10 of 26 clk data vih vil vih vil tdsu valid data start valid data end tdhd valid data start valid data end tdsu tdhd valid data start valid data end tdsu tdhd clk_low t clk tdsu>=8ns;tdhd>=10ns;tclk(typical value)=1/(27*1000*1000)s=37ns;
shanghai tianma micro-electronics tm035kbh07 v0.1 6.2) 24 bit rgb mode for 320rgb x 240 parameter symbol min typ max unit condition clk frequency f clk 6.1 6.4 8.0 mhz vcc=3.0v~3.6v clk cycle time t clk 125 156 164 ns clk pulse duty t cwh 40 50 60 % time that hsync to 1 st data input(ntsc) t hs 40 70 255 clk ddly =70, offset = 0 (fixed) 6.3) 8 bit rgb mode for 320rgb x 240 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 11 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 6.4) ccir601 6.5) ccir656 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 12 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 6.6) 3-wire serial communication ac timing parameter symbol min typ max unit remark serial clock t spck 320 -- -- ns spck pulse duty t scdut 40 50 60 % serial data setup time t isu 120 -- -- ns serial data hold time t ihd 120 -- -- ns serial clock high/low t ckh / t ckl 120 -- -- ns chip select distinguish t cd 1 -- -- us spenb input setup time teck 150 -- -- ns spenb input hold time tcke 150 -- -- ns note ddly description r04: source timing delay control register bit name initial description bit [7:0] ddly[7:0] 46h select the hsd signal to 1?st input data delay timing under ccir601 mode, ths = ddly[7:0] + 128, (unit = clkin) under ccir656 mode, ths = ddly[7:0] + 136, (unit = clkin) under rgb 8/24 bit mode, ths = ddly[7:0] , (unit = clkin) the register value will be update to the different mode,such as 24rgb,8rgb,ccir mode. read the section of ?24rgb,8rgb,ccir mode? for the detail. the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 13 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 6.7) 3-wire control registers list 3-wire registers register description d[15:10] name init r/w function description 000000b r00 07h r/w system control register 000001b r01 00h r/w timing controller function register 000010b r02 03h r/w operation control register 000011b r03 cch r/w input data format control register 000100b r04 46h r/w source timing delay control register 000101b r05 0dh r/w gate timing delay control register 000110b r06 00h r/w reserved 000111b r07 00h r/w internal function control register 001000b r08 08h r/w rgb contrast control register 001001b r09 40h r/w rgb brightness control register 001010b r0a 88h r/w hue/saturation control register 001011b r0b 88h r/w r/b sub-contrast control register 001100b r0c 20h r/w r sub-brightness control register 001101b r0d 20h r/w b sub-brightness control register 001110b r0e 68h r/w vcomdc level control register 001111b r0f 24h r/w vgl/vgh vocmac level control register 010000b r10 04h r/w vgam2 level control register 010001b r11 24h r/w vgam3/4 level control register 010010b r12 24h r/w vgam5/6 level control register the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 14 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 011110b r1e 00h r/w vcomdc trim function control register 100000b r20 00h r/w wide and narrow display mode control register note : r03: c4h:ccir656 mode c2h:ccir601 mode c8h:8 bit rgb mode(hv mode) c9h:8 bit rgb mode(den mode) cch(default):24 bit rgb mode (hv mode) cdh:24 bit rgb mode (den mode) r0f: a4h(default):vgh=15v,vgl=-10v. 24h(recommend): vgh=15v,vgl=-7v. 6.8) reset timing parameter min typ max unit conditions t resb 40 ----- ---- us vci = 3.3v 6.9) power on sequence the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 15 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 note 1. please exit to standby mode through 3-wire command, detail sequence that exit to standby mode under power on mode presentation as below. 2.exit to standby mode, you can write data ?0x03? to register ?r00?, d09=1 for writing data to register. d09=0 for reading data from register. under spi write mode,d08=x , and ?x? means don?t care d08=?1? or ?0?. the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 16 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 6.10) power off sequence note 1. 1vs=1vsync. please entry standby mode through 3-wire command, detail sequence which enter standby mode under power off mode presentation as below. 2. enter to standby mode, you can write data ?0x01? to register ?r00?, d09=1 for writing data to register. d09=0 for reading data from register. under spi write mode,d08=x , and ?x? means don?t care d08=?1? or ?0?. the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 17 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 7 tp timing chart the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 18 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 19 of 26 8 optical characteristics 8.1)optical specification ta=25 item symbol condition min typ max unit remark t 50 60 - b 60 70 - l 60 70 - view angles r cr 10 R 60 70 - degree note 2 contrast ratio cr =0 400 500 - - note1 note3 t on - 10 15 response time t off 25 - 15 25 ms note1 note4 x 0.230 0.280 0.330 white y 0.260 0.310 0.360 x 0.530 0.580 0.630 red y 0.270 0.320 0.370 x 0.280 0.330 0.380 green y 0.535 0.585 0.635 x 0.100 0.150 0.200 chromaticity blue y backlight is on 0.050 0.100 0.150 - note5 note1 uniformity u - - 80 - % note1 note6 ntsc - - - 50 - % note 5 luminance l 250 300 - cd/m 2 note1 note7 test conditions: 1. the ambient temperature is 252 .humidity is 657% 2. the test systems refer to note 1 and note 2.
shanghai tianma micro-electronics tm035kbh07 v0.1 note 1: definition of opt ical measurement system. the optical characteristics should be measured in dark room. after 5 minutes operation, the optical properties are measured at the center point of the lcd screen. all input terminals lcd panel must be ground when measuring the center area of the panel. the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 20 of 26 note 2: definition of viewing a ngle range and measurement system. viewing angle is measured at the center point of the lcd by conoscope(ergo-80) fig. 1 definition of viewing angle item photo detector field contrast ratio luminance chromaticity lum uniformity sr-3a 1 response time bm-7a 2 photo detector field 500mm lcd panel tft-lcd module the center of the screen
shanghai tianma micro-electronics tm035kbh07 v0.1 note 3: definition of contrast ratio ?white state ?:the state is that the lcd should driven by vwhite. ?black state?: the state is that the lcd should driven by vblack. vwhite: to be determined vblack: to be determined. note 4: definition of response time the response time is defined as the lcd optical switching time interval between ?white? state and ?black? state. rise time (ton) is the time between photo detector output intensity changed from 90% to 10%. and fall time (toff) is the time between photo detector output intensity changed from 10% to 90%. note 5: definition of colo r chromaticity (cie1931) color coordinates measured at center point of lcd. the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 21 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 note 6: definition of luminance uniformity active area is divided into 9 measuring areas (refer fig. 2). every measuring point is placed at the center of each measuring area. luminance uniformity(u) = lmin/ lmax l-------active area length w----- active area width fig. 2 definition of uniformity lmax: the measured maximum luminance of all measurement position. lmin: the measured minimum luminance of all measurement position. note 7: definition of luminance : measure the luminance of white state at center point. the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 22 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 23 of 26 9 environmental / reliability tests no test item condition remarks 1 high temperature operation ts=+70 ,240hrs note1 iec60068-2-2,gb2423.2?89 2 low temperature operation ta = - 2 0 , 240hrs iec60068-2-1 gb2423.1?89 3 high temperature storage ta=+80 , 240hrs iec60068-2-2, gb2423.2?89 4 low temperature storage ta = - 3 0 , 240hrs iec60068-2-1 gb2423.1?89 5 high temperature & high humidity storage +60 ,90% rh max, 240 hours note2 iec60068-2-3, gb/t2423.3?2006 6 thermal shock (non-operation) -30 30 min~+ 80 30 min, change time:5min,30 cycle. start with cold temperature, end with high temperature iec60068-2-14,gb2423.22?87 7 electro static discharge (operation) c=150pf, r=330 ? 5points/panel air:15kv,5times;contact:4kv,5times; (environment:15 35 ,30% 60%,86kpa 106kpa ? iec61000-4-2 gb/t17626.2?1998 8 vibration (non-operation) frequency range:10~55hz,stroke:1.5mm sweep:10hz~55hz~10hz 2 hours for each direction of x.y.z.(6 hours for total)(package condition) iec60068-2-6 gb/t2423.10?1995 9 shock (non-operation) 60g 6ms, x, y, z 3times for each direction iec60068-2-27 gb/t2423.5?1995 10 package drop test height:90 cm 1 corner, 3 edges, 1surfaces ? bottom surface toward to the ground ? height:75 cm 1 corner, 5(other)surfaces iec60068-2-32 gb/t2423.8?1995 note1: ts is the temperature of panel?s surface. note2: ta is the ambient temperature of sample.
shanghai tianma micro-electronics tm035kbh07 v0.1 10 mechanical drawing the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 24 of 26
shanghai tianma micro-electronics tm035kbh07 v0.1 11 packing drawing the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 25 of 26 fpc 2 0 1 2 0 1 A u : 6 1 0 1 A u : 6 1 0 1 2 0 1 2 0 1 liquid crystal display ?? liquid crystal display ?? liquid crystal display ?? liquid crystal display ?? liquid crystal display ?? liquid crystal display ?? liquid crystal display ?? liquid crystal display ?? liquid crystal display ?? liquid crystal display ??
shanghai tianma micro-electronics tm035kbh07 v0.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 26 of 26 12 precautions for use of lcd modules 12.1) handling precautions 12.1.1the display panel is made of glass. do not subject it to a mechanical shock by dropping it from a high place, etc. 12.1.2 if the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 12.1.3 do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 12.1.4 the polarizer covering the display surface of the lcd module is soft and easily scratched. handle this polarizer carefully. 12.1.5 if the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. if still not completely clear, moisten cloth with one of the following solvents: isopropyl alcohol ethyl alcohol solvents other than those mentioned above ma y damage the polarizer. especially, do not use the following: water ketone aromatic solvents 12.1.6 do not attempt to disassemble the lcd module. 12.1.7 if the logic circuit power is off, do not apply the input signals. 12.1.8 to prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 12.1.8.1 be sure to ground the body when handling the lcd modules. 12.1.8.2 tools required for assembly, such as soldering irons, must be properly ground. 12.1.8.3 to reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. 12.1.8.4 the lcd module is coated with a film to protect the display surface. be care when peeling off this protective film since static electricity may be generated. 12.2) storage precautions 12.2.1 when storing the lcd modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 12.2.2 the lcd modules should be stored under the storage temperature range. if the lcd modules will be stored for a long time, the recommend condition is: temperature : 0 40 relatively humid ity: ? 80% 12.2.3 the lcd modules should be stored in the room without acid, alkali and harmful gas. 12.3) transportation precautions 12.3.1 the lcd modules should be no falling and violent shocking during transportation, and also should avoid excessive pre ss, water, damp and sunshine.

▲Up To Search▲

Price & Availability of TM35KBH07-V1

	To Download TM35KBH07-V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .